|
||||||||||||||
Boom
Trucks & Crane Trucks |
|||||||||
|
|||||||||
| If you have any inquiries or questions regarding QMC boom trucks and crane trucks, do not hesitate to contact Davit Sales Inc. by telephone 914.962.4544 Fax 914.962.5418 Email - davit1@aol.com | |||||||||
 Pricing
and Specifications |
|||||||||
QMC
TRUCKS ARE HAND-CRAFTED AND FEATURE: |
|||||||||
|
|||||||||
| OVER
25 YEARS OF QUALITY - HANDMADE IN THE U.S.A. |
|||||||||
| Since 1977 QMC has built the highest quality, highest capacity boom trucks in the world. In underground vault setting, in the oil fields, at power plants, and in general construction, QMC boom trucks have earned a reputation for extreme durability. The heart of a QMC boom truck is the steel. All major structural components are manufactured of 100,000 PSI steel as minimum. This high tensile steel must be cut and fitted by hand to exacting tolerances. Then, following strict protocols, the components are welded into an integral lifting structure with an unequalled strength-to-weight ratio. The result? | |||||||||
DURABILITY
·
CAPACITY ·
PAYLOAD |
|||||||||
| All QMC boom trucks feature:
|
|||||||||
| MOUNTING
ON COMMERCIAL TRUCKS PROVIDES ADDITIONAL BENEFITS:
|
|||||||||
|
|
||||||||
| THE RESULT - HIGHER CAPACITY, GREATER MOBILITY, INCREASED PROFIT. |
|||||||||
 |
 |
||||||||
 |
 |
||||||||
| QMC has two primary product lines, boom trucks and truck cranes. The boom trucks are cranes mounted on the rear of commercial truck chassis and ahead of the fifth wheel on three and four axle tractor. Their primary use is to transport and unload large and heavy products. The truck-mounted cranes are centered over the rear tandem axles of a commercial truck chassis. With longer boom lengths and enclosed operator cabs these cranes offer a viable alternative to carrier mounted truck cranes. QMC's reputation is based on the individual attention given to each unit produced. Each crane is tailored as much as possible to each customer's application. | |||||||||
 |
|||||||||
|
A Few Words on QMC's Truck Mounted Cranes and Booms * Capacity: In most cases, particularly when lifting over the side, QMC machines out pick the competition by dramatic margins. This is particularly true at extended radii of 25' to 70". * Quality: QMC cranes are made of 100,000 PSI steel, which gives them an unequalled strength-to-weight ratio. Components are hand fitted to exact tolerances. In terms of both material and workmanship, no other North American manufacturer builds a better product. * Road Speed: Because QMC mounts truck cranes on standard truck chassis, the carrier can be equipped with higher performance engines, transmissions, and suspensions. The result is better road speeds and high-speed gradability when compared to competitive truck cranes. * Operator Comfort: A crane operator would rather spend 40 hours a week driving a Kenworth or Ford or Peterbuild or other conventional truck instead of being pounded by a crane carrier all day. Cabs are also two-man, rather than cramped single operator cabs. * Replacement ability: The carrier of a truck crane usually wears out long before the crane itself. When the chassis wears out with QMC machines, it can be easily replaced. The crane can be removed from the old chassis and remounted on a new in one or two days. QMC cranes are constantly updated in terms and design and components. In addition, special application cranes can be designed and manufactured to meet the specific needs of end users. |
|||||||||
 |
|||||||||
| PRICING AND SPECIFICATIONS: | Back
to Top
|
||||||||
| QMC Cranes offers 21 different models from 10 - 45 ton capacity. Telescoping booms from 25 - 140 ft. with lattice jibs. Cranes and booms are mounted on flatbed trucks and trailers. Entire units can be furnished, including truck chassis or crane or boom units can be mounted on government vehicles. Pricing does not include truck chassis but does include mounting of crane/boom on the truck chassis. Below you will find an equipment list including equipment options. |
|||||||||
|
|||||||||
© 2007 Davit Sales Inc. All rights reserved.